TUTORIAL: Replace PSP faceplate/LCD screen

[Kernel Kev]

PSP Screen replacement tutorial

This tutorial will guide you through replacing the psp screen (also covers faceplate) if you are like me and have had a broken or faulty screen.

Symptoms of a broken psp screen:

• Dead or stuck pixels
• Parts of the screen are black or garbled
• The screen is cracked or spiderwebbed.

What you will need:

• Broken PSP
• Small screwdriver (Philips 00, 000)
• New PSP screen

1) - Place your psp on a clean surface and ensure you have the required items listed above.


2) - The front cover of the PSP is held in place by 5 screws (use your philips screwdriver). To get to two of the screws you have to remove the battery cover and the battery.


3) - Screw #2 may be covered by a warranty sticker. You can try to peel it back a little to get to the screw or you can just rip it off (and void your warranty).


4) - Screw #3 is on the side of the PSP.


5) - The last two screws are on the memory stick side of the PSP. Dont forget to remove the memory stick.


THIS TUTORIAL HAS BEEN TAKEN FROM ANOTHER WEBSITE, AND SO I TAKE NO CREDIT FOR ITS CREATION AND SUPPLIED IMAGES.
THANKS TO CONSOLEZOMBIE

Original tutorial


---UNDER CONSTRUCTION---