Ok, If you have successfully done everything correctly - The Pandoras Battery was correctly made, the files were copied across to the PSP. Then this is what you need to do
1. Turn the PSP on with the AC adaptor inserted and no battery.
2. Turn the PSP off by holding the power switch up, until the unit switches off completely. DO not let go of the power switch until the green light goes off.
3. Remove the power cable
4. Get the battery and place it in the PSP. (Make sure it is fully charged)
5. If it works, the psp should come on automatically and begin an update, place the cover over the battery and allow the update to complete.
6. You should now be on custom firmware. You may want to repair the battery to become a normal battery and not a Pandora
Hope it goes well
|